Features
Standard Features
Transceiver "Auto-matching" of outputs to Furuno transducers
Furuno Free Synthesizer (FFS) Transceiver allows use of easily selected operating frequencies (15/28/38/50/88/107/200kHz)
Display may be set in a Portrait (Vertical) or Landscape (Horizontal) Mode (1)
8 or 16 echo colors with blue, light blue, dark blue, black or white background
8 range scales, may be custom set anywhere from 16 to 6,000 feet (5–2000 m)
Range shift from 0 to 6000 feet (0–2000 m) maximum scale of 12000 feet (4000 m)
Independent Low and High frequency range selection in the Dual Frequency mode
Automatic range shifting mode for continuous bottom acquisition and tracking
System may be scaled in feet, fathoms or meters
Provision for Optional second, remote "Black Box" monitor with second control unit
RGB Monitor output port provided, Optional IF8000 interface unit kit required
TLL output data with elapsed time display, beginning from mark initiation *
Training and Showroom Demonstration mode
Plus vessel draft offset menu, navigation data on screen and more *
Advanced Fish Detection Features
Use of LF or HF only, both LF and HF simultaneously, either LF or HF Zoom, or select from 2 Customized user preset modes
A-Scope screen for rapid help in fish species identification
Bottom hardness discrimination, with menu adjustable bottom width
Tri-screen frequency mix display, LF only, HF only and LF/HF Mix Mode
Both LF and HF preset clutter controls
Both LF and HF preset TVG controls, menu set for TVG level and effective distance
Both LF and HF preset Noise Limiters, menu set to eliminate acoustic interference
White Line display
Both visual and audible, adjustable bottom, fish or temperature zone alarm *
VRM (Horizontal line) and Event Marker (Vertical line)
Picture advance direction can be set to go left, right, or both left and right from the center
Water temperature graph and numerical display, graph color and calibration menu set *
When P.O. is placed Landscape (L) control may be exchanged at N/C for Portrait (P) control, if specified
* Data or sensor input required
|
